Konfigurasi Router Lab_A sbb :
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Lab_A
Lab_A(config)#int fa0/0
Lab_A(config-if)#ip add 192.5.5.1 255.255.255.0
Lab_A(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Lab_A(config-if)#exit
Lab_A>ena
Lab_A#conf t
Lab_A>ena
Lab_A#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Lab_A(config)#ip route 0.0.0.0 0.0.0.0 serial2/0
Lab_A(config)#exit
Gambar :1.3 Tampilan Konfigurasi PC1
Gambar :1.4 Tampilan Konfigurasi Router Lab_B
Konfigurasi Router Lab_B sbb :
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Lab_B
Lab_B#
%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Lab_B#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Lab_B(config)#int fa0/0
Lab_B(config-if)#ip add 219.17.100.1 255.255.255.0
Lab_B(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Lab_B(config)#int serial2/0
Lab_B(config-if)#ip add 199.6.13.1 255.255.255.0
Lab_B(config-if)#clock rate 64000
Lab_B(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Lab_B(config-if)#int serial3/0
Lab_B(config-if)#ip add 201.100.11.2 255.255.255.0
Lab_B(config-if)#clock rate 64000
Lab_B(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Lab_B(config-if)#exit
Gambar : 1.5 Tampilan Konfigurasi PC2
Gambar :1.6 Tampilan Konfigurasi PC3
Gambar :1.7 Tampilan Konfigurasi PC4
Gambar :1.8 Tampilan Konfigurasi PC5
Gambar :1.9 Tampilan Konfigurasi Router Lab_C
Konfigurasi Router Lab_C sbb :
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 223.8.151.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int serial0/0
%Invalid interface type and number
Router(config)#int serial2/0
Router(config-if)#ip add 204.204.7.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Router(config)#int serial3/0
Router(config-if)#ip add 199.6.13.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up
Router(config)#hostname Lab_C
Lab_C(config)#
Lab_C(config)#end
Lab_C#
%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Lab_C#
Gambar :2.0 Tampilan Konfigurasi PC6
Gambar : 2.1 Tampilan Konfigurasi PC7
Gambar :2.2 Tampilan Konfigurasi Router Lab_D
Konfigurasi Router Lab_D sbb :
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Lab_D
Lab_D(config)#int fa0/0
Lab_D(config-if)#ip add 210.93.105.1 255.255.255.0
Lab_D(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Lab_D(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Lab_D(config-if)#exit
Lab_D(config)#int serial3/0
Lab_D(config-if)#ip add 204.204.7.2 255.255.255.0
Lab_D(config-if)#clock rate 64000
Lab_D(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Lab_D(config-if)#exit
Lab_D(config)#
Lab_D(config)#int serial2/0
Lab_D(config-if)#
Gambar :2.3 Tampilan Konfigurasi Router Lab_E
Konfigurasi Router Lab_E sbb :
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Lab_E
Lab_E(config)#int fa0/0
Lab_E(config-if)#ip add 210.93.105.2 255.255.255.0
Lab_E(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Lab_E(config-if)#exit
Lab_E(config)#
Lab_E(config)#end
Lab_E#
%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Gambar :2.4 Tampilan Akhir IP ROUTE STATIS
Tidak ada komentar:
Posting Komentar