Tugas Routing Dinamis

v Setting Router 0

Router>ena

Router#conf t

Router(config)#hostname Router0

Setting Interface fa 0/0

Router0(config)#int fa 0/0

Router0(config-if)#ip add 10.1.0.1 255.255.0.0

Router0(config-if)#no shutdown

Router0(config-if)#exit

Setting Interface se  1/0

Router0(config)#int se 1/0

Route0(config-if)#ip add 10.2.0.2  255.255.0.0

Router0(config-if)#no shutdown

Router0(config-if)#exit

Setting dynamic Routing

Router0(config)#router rip

Router0(config-router)#ver 2

Router0(config-router)#network 10.0.0.0

v Setting Router 1

Router>ena

Router#conf t

Router(config)#hostname Router1

Setting Interface se 0/0

Router1(config)#int se 0/0

Router1(config-if)#ip add 10.2.0.1 255.255.0.0

Router1(config-if)#clock rate 64000

Router1(config-if)#no shutdown

Router1(config-if)#exit

Setting Interface se  1/0

Router1(config)#int se 1/0

Router1(config-if)#ip add 10.3.0.1 255.255.0.0

Router1(config-if)#clock rate 64000

Router1(config-if)#no shutdown

Router1(config-if)#exit

Setting dynamic Routing

Router1(config)#router rip

Router1(config-router)#ver 2

Router1(config-router)#network 10.0.0.0

Setting Router 2

Router>ena

Router#conf t

Router(config)#hostname Router2

Setting Interface se  1/0

Router2(config)#int se 1/0

Router2(config-if)#ip add 10.3.0.2  255.255.0.0

Router2(config-if)#no shutdown

Router2(config-if)#exit

Setting Interface fa 0/0

Router2(config)#int fa 0/0

Router2(config-if)#ip add 10.4.0.1 255.255.0.0

Router2(config-if)#no shutdown

Router2(config-if)#exit

Setting dynamic Routing

Router2(config)#router rip

Router2(config-router)#ver 2

Router(config-router)#network 10.0.0.0

Gambar : Hasil akhir settingan Routing Dinamis

IP ROUTE STATIS

Gambar :1.1 Tampilan Konfigurasi Router Lab_A  

Konfigurasi Router Lab_A sbb :

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Lab_A

Lab_A(config)#int fa0/0

Lab_A(config-if)#ip add 192.5.5.1 255.255.255.0

Lab_A(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Lab_A(config-if)#exit

Lab_A>ena

Lab_A#conf t

Lab_A(config)#int serial2/0

Lab_A(config-if)#ip add 199.6.13.1 255.255.255.0

Lab_A(config-if)#clock rate 64000

Lab_A(config-if)#no shut

Lab_A(config)#exit

Lab_A>ena

Lab_A#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Lab_A(config)#ip route 0.0.0.0 0.0.0.0 serial2/0

Lab_A(config)#exit

Gambar :1.2 Tampilan Konfigurasi PC0

 

Gambar :1.3 Tampilan Konfigurasi PC1 

Gambar :1.4 Tampilan Konfigurasi Router Lab_B

Konfigurasi Router Lab_B sbb :

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Lab_B

Lab_B#

%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Lab_B#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Lab_B(config)#int fa0/0        

Lab_B(config-if)#ip add 219.17.100.1 255.255.255.0

Lab_B(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Lab_B(config)#int serial2/0

Lab_B(config-if)#ip add 199.6.13.1 255.255.255.0

Lab_B(config-if)#clock rate 64000

Lab_B(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Lab_B(config-if)#int serial3/0

Lab_B(config-if)#ip add 201.100.11.2 255.255.255.0

Lab_B(config-if)#clock rate 64000

Lab_B(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial3/0, changed state to down

Lab_B(config-if)#exit

Gambar : 1.5 Tampilan Konfigurasi PC2

Gambar :1.6 Tampilan Konfigurasi PC3

 

Gambar :1.7 Tampilan Konfigurasi PC4

Gambar :1.8 Tampilan Konfigurasi PC5
 

Gambar :1.9 Tampilan Konfigurasi Router Lab_C

Konfigurasi Router Lab_C sbb :

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 223.8.151.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int serial0/0

%Invalid interface type and number

Router(config)#int serial2/0

Router(config-if)#ip add 204.204.7.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#int serial3/0

Router(config-if)#ip add 199.6.13.2 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config)#hostname Lab_C

Lab_C(config)#

Lab_C(config)#end

Lab_C#

%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Lab_C#

 

Gambar :2.0 Tampilan Konfigurasi PC6

 Gambar : 2.1 Tampilan Konfigurasi PC7

Gambar :2.2 Tampilan Konfigurasi Router Lab_D

Konfigurasi Router Lab_D sbb :

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Lab_D

Lab_D(config)#int fa0/0

Lab_D(config-if)#ip add 210.93.105.1 255.255.255.0

Lab_D(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lab_D(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Lab_D(config-if)#exit

Lab_D(config)#int serial3/0

Lab_D(config-if)#ip add 204.204.7.2 255.255.255.0

Lab_D(config-if)#clock rate 64000

Lab_D(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Lab_D(config-if)#exit

Lab_D(config)#

Lab_D(config)#int serial2/0

Lab_D(config-if)#

 

Gambar :2.3 Tampilan Konfigurasi Router Lab_E

 

Konfigurasi Router Lab_E sbb :

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Lab_E

Lab_E(config)#int fa0/0

Lab_E(config-if)#ip add 210.93.105.2 255.255.255.0

Lab_E(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Lab_E(config-if)#exit

Lab_E(config)#

Lab_E(config)#end

Lab_E#

%SYS-5-CONFIG_I: Configured from console by consolecopy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

 

Gambar :2.4 Tampilan Akhir IP ROUTE STATIS